JAYCOMMAND powered by BMPRO is a Smart RV System specially designed for Jayco USA and starting from 2019, is installed in such Jayco RV models as Northpoint, Pinnacle, Seismic, Eagle TT, Talon and HL Ridge.
Starting from mid-2021, JAYCOMMAND/TravelLINK is also available on some models of Starcraft and Highland Ridge RVs.
JAYCOMMAND powered by BMPRO brings smart technology to your RV taking control and management of your RV to new horizons! Control Jayco RV features via a console or from an app on your smartphone.
The JAYCOMMAND sleek, wall-mounted console allows you to monitor and control multiple RV functions, all from one convenient location in your RV. Alternatively, the user-friendly, easy-to-understand app can be downloaded directly to your mobile device and brings the same RV information to your fingertips.
Using the latest technology in Bluetooth and CAN Bus, such as the RV-C system developed by the RVIA, the smart RV system enables integration of further monitoring functions such as TPMS, propane tank monitors, open/close sensors and more at a later stage.
Node |
|
|||||||||
|
Input Voltage Range |
8V - 15V DC |
|||||||||
|
Ambient Temperature |
-4°F to 140°F (-20°C to 60°C) |
|||||||||
|
IP Rating |
IP20 |
|||||||||
|
Approvals |
FCC 47 CR15, CAN ICES-3 (B) / NMB-3 (B), IEC 61000-4-2 Level III, IEC60068-2-27 Table A.1, IEC 60068-2-64 Spectrum A.3 Category 1 |
|||||||||
Controller |
|
|||||||||
|
Input Voltage Range |
8V - 15V DC |
|||||||||
|
Ambient Temperature |
-4°F to 140°F (-20°C to 60°C) |
|||||||||
|
IP Rating |
IP40 |
|||||||||
|
Approvals |
FCC 47 CR15.109, CAN ICES-3 (B) / NMB-3 (B), IEC 61000-4-2 Level III, IEC60068-2-27 Table A.1, IEC 60068-2-64 Spectrum A.3 Category 1 |
|||||||||
Display |
|
|||||||||
|
Input Voltage Range |
8V - 15V DC |
|||||||||
|
Ambient Temperature |
-4°F to 140°F (-20°C to 60°C) |
|||||||||
|
IP Rating |
IP40 |
|||||||||
|
Approvals |
FCC 47 CR15, CAN ICES-3 (B) / NMB-3 (B), IEC 61000-4-2 Level III, IEC60068-2-27 Table A.1, IEC 60068-2-64 Spectrum A.3 Category 1 |
|||||||||
Wall Switches |
|
|||||||||
|
Input Battery |
2.2V - 3.0V CR2032 |
|||||||||
|
IP Rating |
IP40 |
|||||||||
|
Approvals |
FCC 47 CFR 15, CAN ICES-3 (B) / NMB-3 (B), IEC 61000-4-2 Level III, IEC60068-2-27 Table A.1, IEC 60068-2-64 Spectrum A.3 Category 1 |
|||||||||
The JAYCOMMAND Controller is set up to automatically receive app updates and will automatically update whenever a new release is available.
To allow this to happen, make sure that you are:
1. Connected to the internet.
2. Logged into your Google account.
If you do not have a Google account, you can create one.
You can clear the JAYCOMMAND Node’s memory of all paired devices if you have a Controller in your system.
Clearing the Node memory will also clear the pairing between the Node and Controller. After clearing, the Controller will need to be paired to the Node again.
To clear the Node’s memory:
The wall switch is powered by a standard, 3V lithium cell CR2032 coin battery.
You can check if the battery in the wall switch needs replacing from the JAYCOMMAND App’s General Settings. Open the Battery Levels page in the Settings menu, then press any button on the wall switch you want to check the battery of. The JAYCOMMAND App will refresh with the wall switch battery status.
If you need to replace the battery:
© 2020
