ChargeMonitor500
Wired Battery Monitor for Lithium & Lead-Acid Batteries
KEY FEATURES
- Real-Time Monitoring
- User Friendly Display
- Measure up to 500A of current
- Easy DIY Install
$125
Monitor your 12V battery with accuracy!
The BMPRO ChargeMonitor500 is a wired battery monitor and display designed for deep cycle lead-acid AGM, Gel and lithium LiFePO4 batteries. The ChargeMonitor500 provides real-time battery management data, allowing you to effectively monitor remaining battery energy through an easy-to-use display.
Choose the ChargeMonitor500 if you use high-current devices like battery chargers, microwaves, inverters, hair dryers or have other high current requirements. Instantly view volts, amps, time remaining indication, battery temperature, battery status and state of charge.
Battery parameters monitored are:
- Voltage and Temperature
- Charge/Discharge Current
- State of Charge (SoC)
- State of Health (SoH)
- Estimated Discharge Time Remaining
With the ChargeMonitor500, you can monitor your battery’s performance and ensure you’ll always have enough power to keep your adventures on track!
Note: The ChargeMonitor500 is not suitable for engine cranking applications of any type and is not designed for under-vehicle bonnet use.
| Specifications | |
|---|---|
|
Input Voltage |
8- 100V |
|
Standby Current |
0.1mA |
|
Current Measurement Range |
0-500A |
|
Monitored Battery Capacity |
7-1200Ah |
|
Temperature Measurement Range |
-20 to 70°C at battery terminal |
|
Working Temperature |
-10 to 50°C |
|
Display Diameter |
63mm |
|
Display Items |
Voltage, remaining Ah
capacity of battery, charge
or discharge watts, battery
temperature, percentage
battery capacity, &
discharge or charge status. |
FAQs
The ChargeMonitor500 is designed for deep cycle batteries (also known as ‘house’ batteries) and as such should not be used on a starter battery.
