ChargeMonitorMax
Wired Battery Monitor for Lead Acid & Lithium Batteries
KEY FEATURES
- Real-time monitoring
- User-friendly display
- Works with batteries in parallel
- Measure up to 500A peak current
Compatible with deep cycle lead acid, AGM, Gel and LiFePO4 batteries
$178
Monitor your batteries with real-time data
The ChargeMonitorMax wired battery monitor is designed to monitor and display your battery performance using real-time data, allowing you to effectively track your battery’s remaining energy through an intuitive display.
Compatible with a variety of standard lead-acid and LiFePO4 lithium batteries, the ChargeMonitorMax can be used to instantly view volts, amps, state of charge, and remaining battery capacity, making it ideal for devices like microwaves, inverters, and hair dryers.
The ChargeMonitorMax will ensure you always have enough power for your high-current devices and keep your adventures on track!
Note: The ChargeMonitorMax is not suitable for engine cranking applications of any type and is not designed for under-vehicle bonnet use. However, you can use it in a Ute tray application in a sealed battery box or in a marine application if the battery area is free from water and salt.
Battery parameters monitored are:
- Voltage and Temperature
- Charge/Discharge Current
- State of Charge (SoC)
- State of Health (SoH)
- Estimated Discharge Time Remaining
For low current requirements (up to 100A), we recommend using BatteryCheck100, available to purchase online and via BMPRO authorised resellers.
| Specifications | |
|---|---|
|
Working Voltage |
10V – 120V |
|
Voltage Accuracy |
±1% |
|
Current Accuracy |
±1% |
|
Capacity Accuracy |
±1% |
|
Backlight on Current (>50A) |
100mA |
|
Present Capacity Value |
0.1-9999Ah |
|
Temperature Range |
-10°C to 60°C |
|
Weight |
Approx. 75g |
|
Size (LCD Interface) |
99x61x18mm |
|
Shielded Wire Length |
6m |
|
B+ Wire Length |
1m |
FAQs
Yes, the ChargeMonitorMax is compatible with both lead acid batteries and lithium LiFePO4 batteries.
