Shunt For Drifter
200A shunt for accurate reading of amps on Drifter display
Shunt for Drifter
The shunt comes in a 200A shunt (part number 026133), and was designed for use with Drifter display series only. This is to allow for an accurate reading to the drifter of amps going in and out of the batteries as all times. The shunt with the Drifter panel was generally installed with either the ST series (early Jayco Power Management System) or to the Genius series of Power Management System.
Compatible with:
| Battery & Power Management Systems | Dispay and Node Series |
|---|---|
| Genius Series | Drifter |
| ST-series | Drifter |
Specifications
| Specification | Detail |
|---|---|
| Battery Current | ±200mV (200A shunt) |
| Shunt Resistance | 1mΩ ±1% ±50ppm/°C |
Add a review
Shunt For Drifter
Your review
* Review is required
Name
* Name is required
Email
* Email is required
Add photos or video to your review
33%
0%
67%
0%
0%
1-3 of 3 reviews
Stopped at 99.9 amps as didn’t read lithium batteries correctly my bad
Only 3 stars because it’s not a true 200A shunt, I’ve read it’s really only 160A and that probably explains why it got so hot when I ran my microwave through my inverter which is attached to it, I measured the amps the inverter was pulling when using the microwave and it was only 133A but probably close enough to the 160A to make the shunt get pretty hot but still usable, it looks like it will do the job but I wouldn’t want to run anything that pulled anymore amps than what my microwave does. I’ll recommend it but not as a 200amp shunt, maybe you should test it and rebrand it.
Effortless to install