ProBoost25

25A Lithium DC–DC Charger With Solar Input

KEY FEATURES

Dual input MPPT solar/aux (alternator)
Lithium compatible
Multi-battery chemistry selector
IP56 rating – resistant to dust, water & shock damage
Maintains a 100% state of charge of auxiliary batteries
Suitable for under-bonnet installation

*The ProBoost DC-DC Charger is designed to work as a standalone product.

To use this with a BMPRO Power Management System, such as the BatteryPlus35-II or the J35, you will need to connect it through a PXShunt500 or BC300 External Shunt. For more details refer to this help guide.

$315

Currently out of stock

$445

Intelligent DC-DC chargers

BMPRO’s ProBoost25 is a DC-DC battery charger that allows you to charge a secondary battery using solar panels and/or a towing vehicle’s 12V electrical system.

The ProBoost25 utilises solar and auxiliary inputs to produce a maximum of 25A which ensures there is a consistent charge to your battery.

Compatible with both lead-acid and lithium LiFePO4 batteries, the high power density design of the ProBoost25 provides efficiency of up to 93%.

The ProBoost25 has an ultra-thin design, making it suitable for installation in small spaces, and is resilient to shaking, as well as wet, dusty or muddy environments.

A range of protective features built into the ProBoost25, such as overtemperature, overvoltage and undervoltage protection, will guard your charging capacity.

FAQ

Will the ProBoost25 work with smart alternators?

Yes, the ProBoost25 will work with smart alternators.

What type of fuses should I use with the ProBoost25?

We recommend using bolt down fuses, as they ensure a low resistance connection.

Blade type fuses are not recommended. These fuses can result in a high resistance connection which causes excess heat, which may damage the fuse holder and/or the wiring.

Self-resetting circuit breakers are not recommended. These may trip prematurely due to the heat generated by the current flowing through the wires.

Can I use the ProBoost with my BMPRO Power Management System?

The ProBoost is designed to work as a standalone product for charging the auxiliary battery in the tow vehicle.

If you want to use this with a BMPRO Power Management System, such as the BatteryPlus35-II or the J35, you will need to connect it through a BC300 External Shunt.